METHOD OF USE 1.Gently buffer your nail surface so they're not shiny and smooth. 2.Apply base coat - cure with LED or UV nail dryer lamp. 3.Apply 1st thin coat of polish - cure. 4.Apply 2nd thin coat of polish - cure. --Apply 3rd coat if necessary. 5.Apply top coat - cure. 6.Wipe nails with rubbing alcohol(cleanser) to remove residue. --Curing time: UV light for 2 mins, LED light for 30-60 secs **Perfect Summer FAQ** 1. Not dry First of all, you need to make sure that your lamp works well. Feel sticky and not dry after curing the top coat ----Please don't forget to use the nail cleanser or the rubbing alcohol to wipe the sticker layer, which is common sense during doing the gel nail! 2. Too thick Remember, painting skill is important. Before applying, stir the gel inside the bottle and don't let too much gel pulled out by the brush, make it thinner! Then, painting every thinner layer on the nails, 2-3 thin layers can reach the advertisement effect normally. 3.Peel off Easily (1) The oiliness nail itself that will make the gel polish peel off easily. (*TIPS*: use nail strengthener to get improved) (2)Without using a nail file to dehydrate your nail and make the nail surface dry and rough. (3)Curing too long time under the lamp that influence the nail's durability. (4)Not enough nail surface cleanser to wipe the sticky layer, or it will be cracked. (5)Different brand base coat used with our brand gel that MAY influence its compatibility. (6)Painting too much for the base coat, which will make the gel shrink, once shrank, the gel will peel off from nails, likewise, proper top coat is suggested.